Products

Firus Fire Automation is the best solution designed for places where fire protection is important. It creates a safety barrier between the center of the fire and the place that needs to be protected. It is produced in accordance with international fire specifications. In Turkey, fire protection systems have become mandatory in accordance with the "Regulation on Fire Protection of Buildings" published in the official newspaper on 19/12/2007. FirusFire Automation Shuttersproduced in accordance with the definition in Article 4 of this regulations are the alternative solution suitable for the system in all kinds of structures. Firus Fire Automation doors are specially produced according to all sizes. Equipped with an automatic shutdown device that can work with fire automation and fire scenarios in emergency situations, Firus Fire Automation traps the danger until it is intervened. Each Firus Fire Automation gate has been tested according to stn EN 1634–1/AC:2007 test method in real conditions and certified by UKAS accredited test laboratory. Firus Fire Automation is the symbol of high quality safety door. Spiral Door Curtain: Single walled(Firus Fire Automation–80) material made of galvanized sheet metal is used. Each lamellar is designed as an 80mm profile and has strength-enhancing grooves. The plugs installed during the joining of the Shutter also serve as the guide of the door. The bottom base is supported by galvanized steel bars. Shaft Group shaft is made of tensile steel pipe. The maximum ratio of 1/400 city is taken into account according to the width of the door. It is used according to system dimensions in the capacity to carry the engine system. Main Support Poles Hood, main support plates and motor connection legs are made of galvanized steel. Vertical Side Channels are made of galvanized material with resistance and required thickness to provide shutter system and fire strength. The doorway is designed to keep the friction of the shutter to a minimum. Use Can be mechanically switched off mechanically at 73°C with Fusible-link. Optionally equipped with alternative usage systems connected to the fire notification system etc. Firus Fire Automation Spiral Door, thanks to its insulation power, keeps the radiation value of the other side to the maximum level. Firus Fire Automation Compliance of Fire Resistant Shutters to Standards Firus Fire Automation fire resistant shutters have been tested and certified by UKAS accredited test laboratory according to STN EN 1634-1/AC:2007 test method. Accordingly, according to the fire resistance test; It is classified as E180-C0 / EW 15-C0 and has been proven to maintain its integrity for 181 minutes (3 Hours). In addition, each Firus Fire Automation fire-resistant shutter is in mechanical considerations; EN 12604 (Used in industrial and commercial structures and garages - Mechanical considerations), Safe from fall; EN 12453 – 5.1.1.5, Installation information; EN 12635: 2002 4.1.1.1, Mechanical performance continuity; En 12635: Produced in accordance with 2002 4.1.1.1 standards.